当前位置:
微型减速电机出现缺相怎样解决?
回复 | 人气 | 打印
不同认为 个人主页 给TA发消息 加TA为好友 发表于:2020-01-11 10:21:34 楼主

  1、首先要检查微型减速电机是否有故障,电源电路是否有断路器,熔断器是否有熔断器,然后再检查三相绕组各相是否有电流断路。

  2、重新启动微型减速电机,如果电机护栏发生故障,不能启动,同时发出蜂鸣声,及时切断电源。

  3、如果电源线断线,更清楚的是,在以下线索良好的情况下,应将保险丝更换为同规格熔化情况的起动器故障,并仔细检查直流电机的发动机。

  对于微型减速电机来说,任何故障都会影响使用效果,更不用说“缺相”等危险故障了。如果在使用过程中发现此类故障,应及时采取上述措施,避免危险源扩大。

  微型减速电机

  1. First of all, it is necessary to check whether the miniature deceleration motor is faulty, whether there is a circuit breaker in the power supply circuit and whether there is a fuse, and then check whether there is a current break in each phase of the three-phase winding.

  2, in addition, restart the micro deceleration motor, if the motor barrier failure, can not start, at the same time buzzing, cut off the power supply in time.

  3. If the power cable is disconnected, it is even more clear that when the following clues are good, the fuse should be replaced with the starter failure of the melting situation of the same specification, and the engine of the DC motor should be carefully checked.

  For the miniature deceleration motor, any failure will affect the use effect, not to mention the dangerous fault such as "missing phase". If this kind of fault is found in the course of use, we should take the above measures in time to avoid the expansion of dangerous sources.

分享到: 关注收藏 邀请回答 回复 举报


周点击排行
周回复排行
最新求助