下面是CPU的报错:
Diagnostic buffer of module CPU 315-2 PN/DP
Order No./ Description Component Version
6ES7 315-2EH13-0AB0 Hardware 4
- - - Firmware V 2.6.7
Boot Loader Firmware expansion A 10.13.9
Rack: 0
Slot: 2
Serial number: S C-XNUB47342009
Event 1 of 500: Event ID 16# 49A0
STOP caused by parameter assignment error or unpermissible difference between preset and actual configuration: startup disabled
No relevance for user (SDB no.): 2000
No relevance for user (Z2): 0000 (Z3): 0000
Previous operating mode: STARTUP (warm restart)
Requested operating mode: STOP (internal)
External error, Incoming event
02:15:25.916 AM 09/09/1995
Event 2 of 500: Event ID 16# 4301
Mode transition from STOP to STARTUP
STOP due to: STOP caused by PG stop operation or by SFB 20 "STOP"
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI; last power on backed up
Permissibility of certain startup types:
- Manual warm restart permitted
- Automatic startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of the automatic startup type at power on:
- Warm restart triggered via MPI; last power on backed up
Previous operating mode: STOP (internal)
Requested operating mode: STARTUP (warm restart)
Incoming event
02:15:25.866 AM 09/09/1995
以下是CP342-5的4报错:
Diagnostic buffer of module CP 342-5
Order No./ Description Component Version
6GK7 342-5DA02-0XE0 Hardware 7
- - - Firmware V 5.7.3
Rack: 0
Slot: 4
Event 1 of 62: Event ID 16# F9C1:0322
Lack of system memory to load SDB 2000 by the CPU containing the SDBs: Error code 8301
External error, Incoming event
楼主最近还看过