直流调速板 点击：1991 | 回复：8
发表于：2006-03-14 09:16:00
2楼
DESCRIPTION
The KBIC® full-wave DC motor speed controls are
designed for applications demanding excellent performance,
high reliability and low cost. Although compact in size (only
4.30" x 3.64" x 1.25"), these controls offer better than
2% regulation over a 50:1 speed range. The controls are
fabricated with components which have proven reliability,
including MOV transient protection, which is used to protect
the power bridge. Integrated circuitry is used to provide a
non-complicated design with superior load and line voltage
regulation. Electronic current limiting (CL) protects the
motor and control against overloads by limiting the
maximum level of output current. Acceleration start
(adjustable from .5 to 4 seconds) provides a smooth start
each time the AC power is applied.
A unique feature of the KBIC® controls is the Plug-in
Horsepower Resistor®. It eliminates the need for recalibrating
IR Comp and Current Limit when the control is used on
various horsepower motors. Additional versatility is achieved
by using the Auxiliary Heatsink (optional) which is used to
double the horsepower rating of each model. The output of
the control is a linear function of potentiometer rotation. The
KBIC® can also be operated in a voltage following mode by
supplying an isolated analog signal (0 – 9VDC) to the input
terminals P2 (+) and F-. The controls are terminated as standard
with Q-D terminals. A Barrier Terminal Accessory Kit is
available which incorporates both line and armature fuses.
The Inhibit™ circuit (terminals I1 and I2) is provided to
electronically disconnect the armature output voltage.
Another standard feature is Auto Inhibit®. This circuit prevents
false starts and high surge currents when cycling the KBIC®
control with the AC line.
A variety of models are provided with choices of voltage
and current ratings. Model KBIC-240D operates on both 115
and 230 VAC to provide 0 – 90 and 180 VDC output. Model
KBIC-240DS operates on both 115 and 230 VAC
to provide 0 – 90 VDC output. Included with the controls are
a 5K remote potentiometer, mounting hardware and
operating instructions.
The KBIC® full-wave DC motor speed controls are
designed for applications demanding excellent performance,
high reliability and low cost. Although compact in size (only
4.30" x 3.64" x 1.25"), these controls offer better than
2% regulation over a 50:1 speed range. The controls are
fabricated with components which have proven reliability,
including MOV transient protection, which is used to protect
the power bridge. Integrated circuitry is used to provide a
non-complicated design with superior load and line voltage
regulation. Electronic current limiting (CL) protects the
motor and control against overloads by limiting the
maximum level of output current. Acceleration start
(adjustable from .5 to 4 seconds) provides a smooth start
each time the AC power is applied.
A unique feature of the KBIC® controls is the Plug-in
Horsepower Resistor®. It eliminates the need for recalibrating
IR Comp and Current Limit when the control is used on
various horsepower motors. Additional versatility is achieved
by using the Auxiliary Heatsink (optional) which is used to
double the horsepower rating of each model. The output of
the control is a linear function of potentiometer rotation. The
KBIC® can also be operated in a voltage following mode by
supplying an isolated analog signal (0 – 9VDC) to the input
terminals P2 (+) and F-. The controls are terminated as standard
with Q-D terminals. A Barrier Terminal Accessory Kit is
available which incorporates both line and armature fuses.
The Inhibit™ circuit (terminals I1 and I2) is provided to
electronically disconnect the armature output voltage.
Another standard feature is Auto Inhibit®. This circuit prevents
false starts and high surge currents when cycling the KBIC®
control with the AC line.
A variety of models are provided with choices of voltage
and current ratings. Model KBIC-240D operates on both 115
and 230 VAC to provide 0 – 90 and 180 VDC output. Model
KBIC-240DS operates on both 115 and 230 VAC
to provide 0 – 90 VDC output. Included with the controls are
a 5K remote potentiometer, mounting hardware and
operating instructions.
发表于：2010-02-05 14:00:32
7楼
广州市海珠区申电机电经营部
电话: 020-31657870 34344524
传真: 020-34344524
休息时段电话：13535461454
网址：www.sindin.cn
地址: 广州市海珠区南田路龙田西街口江南乐居苑
20号首层
热门招聘
相关主题
- 安川H1000变频器报警UV3怎么...
[6139] - 变频器带惯性大的负载应该怎...[5853]
- 安川G7变频器报VCF解决办法[15145]
- ABB变频器是哪个国家的产品呢...[13733]
- 常见变频器品牌[14368]
- 变频器接地故障[10780]
- 施耐德变频器常见问题及解答...[7520]
- 变频器进线不能安装漏电保护...[5398]
- 电压矢量控制(VVC)原理与PWM...[5476]
- 变频器用电位器调速度，说明书...[11208]
官方公众号
智造工程师
-
客服
-
小程序
-
公众号
工控网智造工程师好文精选
