发表于:2005-07-30 20:28:00
楼主
;1618
; *****************************************************************
; * *
; * *
; * *
; *****************************************************************
;
;
;
; ************ Program information *************
;
; File Name : ak02_v20.plc
; Date : 2/7 2004
;
; User :
; Serial No. :
; PLC Ver : v7
;
; System Ver. : 10.020
;
; Modify from :
; ak02_v19.plc ど20祑砰
;
;
; ********* The active function of machine ********
;
DEFFN
DEF INSEND 0 ; 祘挡
DEF INSSTART 1 ; ガ Load Ratio Ratio1 FixVol
DEF INSHEATING 2 ; ど放 Temp Grad. Time
DEF INSCOOLING 3 ; 放 Temp Grad. Time
DEF INSFILLVOL 4 ; 瑈秖
DEF INSFILL 5 ; Code Level
DEF INSDRAIN 6 ; 逼 Code Level
DEF INSRINSE 7 ; 犯瑈瑍 Code Mode Time
DEF INSRUN 8 ; 笲︽ Time
DEF INSOPCALL 9 ; ㊣
DEF INSPREPARE_B 10 ; 称媚B Code Level Time
DEF INSRECIRC 11 ; 瑈媚
DEF INSDOSING_B 12 ; ﹚秖B Curve Time
DEF INSINJECT_B 13 ; 媚B Code Level Time
DEF INSPREPARE_C 14 ; 称媚C Code Level Time
DEF INSDOSING_C 15 ; ﹚秖C Curve Time
DEF INSINJECT_C 16 ; 媚C Code Level
DEF INSRINSE1 18 ; уΩ瑍
DEF INSLEVEL 20 ; 癘拘
DEF INSFILLVOL1 21 ; 癘拘
DEF INSPUMPSPEED 31 ; 硉
; ********* Defination of controller User's factor ********
DEFUF
;
DEF 逼Ч┑筐挡丁ノ0 0 ; Drain time below lower level off in minutes
DEF 荐筁篊秨丁ノ1 1 ; Time limit switch from hot to cold water filling
DEF 翴逼溃Ω计ノ2 2 ; Times of switch air out
DEF 翴逼溃闽丁ノ3 3 ; Off time of air out valve
DEF 翴逼溃秨丁ノ4 4 ; On time of air out valve
DEF 荐竟秨丁ノ5 5
DEF 媚┑筐丁ノ6 6 ; Delay time for inject to empty
DEF 材Ω瑍表丁ノ7 7 ; Delay time for rinse and re-inject
DEF 媚┑筐丁U8 8 ; Delay time for re-Inject
DEF 材Ω瑍表丁U9 9 ; Delay time for tank clean fill
DEF 瑍逼丁U10 10 ; Delay time for tank drain
DEF UF_TEMPTYTIME1D 11 ; Delay time for inject to empty of dosing
DEF UF_TRINSETIME1D 12 ; Delay time for rinse and re-inject of dosing
DEF UF_TEMPTYTIME2D 13 ; Delay time for re-Inject of dosing
DEF UF_TRINSETIME2D 14 ; Delay time for tank clean fill of dosing
DEF UF_TEMPTYTIME3D 15 ; Delay time for tank drain of dosing
DEF INJECTONTIME 16 ; On time of switch inject mode
DEF INJECTOFFTIME 17 ; Off time of switch inject mode
DEF PROTECTTIME1 18 ; Protect time for fill drain,
DEF PROTECTTI