mcgs串口操作 点击：8953 | 回复：507
正在下载，请等待……
楼主最近还看过
#include <ModbusMaster.h>
// instantiate ModbusMaster object
ModbusMaster node;
void setup()
{
// use Serial (port 0); initialize Modbus communication baud rate
Serial.begin(19200);
// communicate with Modbus slave ID 2 over Serial (port 0)
node.begin(2, Serial);
}
void loop()
{
static uint32_t i;
uint8_t j, result;
uint16_t data[6];
i++;
// set word 0 of TX buffer to least-significant word of counter (bits 15..0)
node.setTransmitBuffer(0, lowWord(i));
// set word 1 of TX buffer to most-significant word of counter (bits 31..16)
node.setTransmitBuffer(1, highWord(i));
// slave: write TX buffer to (2) 16-bit registers starting at register 0
result = node.writeMultipleRegisters(0, 2);
// slave: read (6) 16-bit registers starting at register 2 to RX buffer
result = node.readHoldingRegisters(2, 6);
// do something with data if read is successful
if (result == node.ku8MBSuccess)
{
for (j = 0; j < 6; j++)
{
data[j] = node.getResponseBuffer(j);
}
}
}
```
_Project inspired by [Arduino Modbus Master](http://sites.google.com/site/jpmzometa/arduino-mbrt/arduino-modbus-master)._
## License & Authors
- Author:: Doc Walker ([4-20ma@wvfans.net](mailto:4-20ma@wvfans.net))
- Author:: Ag Primatic ([agprimatic@gmail.com](mailto:agprimatic@gmail.com))
- Author:: Marius Kintel ([marius@kintel.net](mailto:marius@kintel.net))
```
Copyright:: 2009-2016 Doc Walker
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
```
- ABB 触摸屏 CP600的应用笔记
[2300] - [分享]西门子触摸屏编程软件...[2324]
- 后缀为.mtp的触摸屏程序,用什...[9883]
- 求助MT510TV4CN触摸屏程序编...[4415]
- 有没有触摸屏可以让用户输入...[3326]
- 西门子资料，需要的来下载一下...[8657]
- 昆仑通态触摸屏与松下PLC通信...[5965]
- 怎样让触摸屏有保存功能[22423]
- 通过以太网传输Proface触摸屏...[6538]
- 三菱GOT1000被设密码怎么办[2500]
官方公众号
智造工程师
-
客服
-
小程序
-
公众号
工控网智造工程师好文精选
