发表于:2005-12-20 12:01:00
楼主
各位大侠,我有一块板子gpib板是第三方制造的,从他的manual上看,要使用labview device control,和max,需要ni-488.2 v1.7版本的驱动,
现在的ni-488.2驱动已经是2.3版本,不支持我的硬件了,
ni现在已经不提供v1.7的下载,如果有人需要,要向ni写信索取
但是要提供s/n和part number,
=====================================================
Hello,
I would be happy to send you the NI-488.2 v1.7 drivers, but first I will need your part number (sometimes abbreviated ASSY number on the board) and the serial number (usually printed on a barcoded sticker on the board).
Thanks,
======================================================
不知道哪位好心人可以帮助我,
正好有v1.7的驱动软件
或者有
AT-GPIB/TNT(un-plug&play)或与之类似的使用v1.7驱动的GPIB卡,把SN或PART NUMBER发给我,
谢谢
我的EMAIL:
eric1970@gmail.com