Pro-face编程电缆CA3-USBCB-01驱动程序-专业自动化论坛-中国工控网论坛

Pro-face编程电缆CA3-USBCB-01驱动程序点击：1838 | 回复：8

[版主]
精华：53帖
求助：44帖
帖子：3351帖 | 28451回
年度积分：603
历史总积分：131640
注册：2006年4月25日

发表于：2017-07-31 09:14:16

楼主

操作系统：Windows® 2000 Service Pack 4; Windows® XP

支持软件：GP-Pro EX - all versions

Installation Procedure
Prior to installation, be sure to close all software applications that are running.
1. Click on the link "CA3-USBCB-01Driver.zip" in the table above to download the file to the desired folder.
2. After the download is finished, double-click on the "CA3-USBCB-01Driver.zip" file to open it.
3. Designate a directory to extract (unzip) the file, and then click OK.
4. The driver will be saved in the "CA3-USBCB-01Driver" folder created in the designated directory.
5. After extracting, connect the USB screen transfer cable (CA3-USBCB-01) to a USB port on the PC..
6. After "Found New Hardware Wizard" is displayed, follow the installer‘s instructions to complete installation. (choose "CA3-USBCB-01Driver" folder created in the procedure No. 4)

7. Confirm the installation using the following procedures:
1. Right-Click on "My Computer" and choose "Properties".
2. Choose the "Hardware" tab and then click "Device Manager".
3. Double-click "Universal Serial Bus Controllers"
4. "USB Link Cable (CA3-USBCB-01)" will be in the list if the driver is installed properly.

希望可以帮到有需要的朋友！

正在下载，请等待……