SINAMICS-S120-基本参数-专业自动化论坛-中国工控网论坛

PROFIBUS receive接收
PZD1	STW1	Control word 1
	STW1.0	ON/OFF1	p840[0]
	STW1.1	No OFF2	p844[0]
	STW1.2	No OFF3	p848[0]
	STW1.3	Enable operation	p852[0]
	STW1.4	Do not reject traversing task	p2641
	STW1.5	No intermediate stop	p2640
	STW1.6	Activate traversing task	p2631,p2650
	STW1.7	Acknowledge faults	p2103
	STW1.8	Jog 1 ON	p2589
	STW1.9	Jog 2 ON	p2590
	STW1.10	Control via PLC	p854[0]
	STW1.11	Start homing	p2595
PZD2	SATZANW	Pos block selection
	SATZANW.0	Block selection, bit 0	p2625
	SATZANW.1	Block selection, bit 1	p2626
	SATZANW.2	Block selection, bit 2	p2627
	SATZANW.3	Block selection, bit 3	p2628
	SATZANW.4	Block selection, bit 4	p2629
	SATZANW.5	Block selection, bit 5	p2630
	SATZANW.15	Activate MDI	p2647
PZD3	PosSTW	Pos control word
	PosSTW.0	Tracking mode	p2655[0]
	PosSTW.1	Set home position	2596
	PosSTW.2	Reference cam active	p2612
	PosSTW.5	1=Jogging, incremental active 0=Jogging, velocity active	p2591
PZD4	STW2	Control word 2
	STW2.0	Drive data set selection DDS, bit 0	p820[0]
	STW2.1	Drive data set selection DDS, bit 1	p821[0]
	STW2.2	Drive data set selection DDS, bit 2	p822[0]
	STW2.3	Drive data set selection DDS, bit 3	p823[0]
	STW2.4	Drive data set selection DDS, bit 4	p824[0]
	STW2.7	Parking axis	p897
	STW2.8	Traverse to fixed endstop	p1545[0]
	STW2.11	Motor changeover, feedback Signal	p828[0]
PZD5	Over	Pos velocity override	p2646
PZD6	MDIPos	Pos MDI position	p2642
PZD7	MDIPos	Pos MDI position	p2642
PZD8	MDIVel	Pos MDI velocity	p2643
PZD9	MDIVel	Pos MDI velocity	p2643
PZD10	MDIAcc	Pos MDI acceleration override	p2644
PZD11	MDIDec	Pos MDI deceleration override	p2645
PZD12	MDIMode	Pos MDI mode	p2654
PZD13
PZD14
PZD15
PZD16

SINAMICS-S120-基本参数设置-非常有用

正在下载，请等待……

下载附件需 0 积分！

楼主好人啊，非常需要这个东西

SINAMICS-S120-基本参数